Design
Load studies, fuel-quality assessment, single-line design and emissions modelling before a single unit leaves the yard. We size to the duty cycle, not the nameplate.
Natural gas · Propane · 125 kW - 30 MW+
Power where the grid doesn't reach.
We design, deploy and remotely operate industrial natural gas and propane power systems, cutting fuel spend by up to 80% against diesel systems.
Your strategic Canadian
power infrastructure partner.
Vertically integrated power solutions for industrial and critical infrastructure projects, fuel, generation, controls and monitoring designed and delivered as one scope.
Integrated Fuel Solutions
Natural gas, CNG, LNG and propane systems optimized for cost efficiency.
Scalable Modular Power
Modular generator blocks scale efficiently from single units to multi-megawatt deployments.
Reliability & Performance
Prime-rated generators deliver continuous power with high transient response and uptime.
Engineered System Design
Site-specific power systems engineered for prime, standby and continuous industrial operation.
Controls & Paralleling
Synchronized controls enable load sharing, redundancy and seamless multi-unit operation.
Monitoring & Support
Remote monitoring, commissioning and field service support reliable long-term operation.
Fuel
Natural Gas
Reliable, low-emission power using pipeline gas or field gas. Ideal for continuous prime power with reduced fuel costs and a smaller environmental footprint.
Fuels
Sectors
Click a segment
125 kW to 30 MW+
Engineered gas-powered generation solutions
What we do
Engineer it. Mobilize it.
Energize it.
Deploy
Trailer-mounted, sound-attenuated, weatherproof packages that arrive complete with distribution, cable and controls. Standardized so a spare part is never a project.
Optimize
Every set reports 30+ parameters every 15 minutes, load, fuel burn, emissions, service countdown. You see the same dashboard we do, 24/7/365.
Diesel vs. industrial natural gas and propane
The economics
changed. Most fleets haven't.
A natural gas or propane generator does the same work as a diesel set, for a fraction of the fuel expense, a fraction of the service, and elimination of the spill exposure.
- Fuel savings of roughly 30-80%
- A third to a sixth the service intervals
- Fuel spill risk eliminated entirely
- Materially lower CO₂ and particulate
Indexed against an equivalent diesel package
Diesel baseline = 100. Actual results vary with fuel source, load factor and site conditions.
Fuel cost per kWh
-30% to -80%Scheduled service events
÷3 to ÷6CO₂e per kWh
Materially lowerOn-site liquid fuel spill risk
Eliminated
Diesel baseline
Remote Power gaseous package
The fleet
From a 125 kW generator
to a 30 MW+ power station.
Pipeline · CNG · LNG
Wellhead & CBM capable
RNG ready
Natural gas generation
Gaseous-fuel gensets from 125 kW to 30 MW+, packaged in sound-attenuated weatherproof enclosures. Parallel generators as you grow, fueled by pipeline-grade gas, CNG, LNG, wellhead gas, coal-bed methane or renewable natural gas.
- Unit range125 kW - 2-4 MW
- Paralleled site capacityUp to 30 MW+
- EnclosureSound attenuated · weatherproof
- MountingTrailer · skid · containerized
- CertificationEPA · CSA
- Telemetry30+ metrics / 15 min
- New-build lead timeImmediate - 120 days
No pipeline required
Bulk or bottle supply
Cold-weather rated
Propane generation
Where there is no gas line, propane delivers the same fuel and maintenance economics with a supply chain that reaches anywhere a truck can. Ideal for construction, remote camps, seasonal sites and emergency standby.
- Unit range125 kW - 2 MW
- Paralleled site capacityUp to 30 MW+
- Fuel supplyBulk tank · vaporiser · bottle bank
- EnclosureSound attenuated · weatherproof
- Spill exposureNone, no bulk liquid fuel
- CertificationEPA · CSA
1 MW - 30 MW+
Remotely dispatched
N+1 / N+2 capable
Multi-megawatt power stations
Remotely monitored and controlled stations for large industrial sites. Modular by design, add capacity in blocks as load grows, with automatic load sharing, sequencing and redundancy across the bank.
- Station capacity1 MW - 30 MW+
- ArchitectureModular parallel banks
- ControlRemote start / stop / dispatch
- RedundancyN · N+1 · N+2
- DistributionLV / MV / HV switchgear included
- Grid interfaceIslanded or grid-parallel
Switchgear
Low, medium and high-voltage switchgear for rental, lease or sale, plus custom fabrication where the standard product doesn't fit.
Transformers
Step-up and step-down packages matched to the genset bank and the site's distribution voltage.
Battery energy storage
BESS for peak shaving, load smoothing and spinning-reserve replacement, sold outright or bundled into a hybrid package.
Cable & accessories
Feeder cable, spider boxes, distribution panels and everything else needed to land power where the work is.
Custom fabrication
Purpose-built electrical distribution hardware designed and fabricated to the site's constraints.
Service & parts
Routine maintenance across Canada, contractor training programs and parts sales for owner-operated fleets.
Featured deployment
Three units, paralleled,
at the end of the road.
A steep-access mountain site with no practical utility connection and a seasonal supply route. Three standardized units mobilized and paralleled as one system — distribution, cable and controls included in the same scope.
3
Units paralleled
NG
Natural gas fueled
1/3rd
Service trips vs diesel
In the field
Real sites. Real fleet.
A cross-section of recent deployments, mountain, municipal, industrial and commercial.
Interactive
Size your site.
Set the load, the duration and the redundancy you need. We'll show the package, the indicative fuel saving against diesel, and the CO₂e you avoid.
Load configurator
Indicative only, a formal proposal follows a site load study.
Continuous site load1,500 kW
Duration on site12 months
Fuel
Redundancy
- Recommended package
- 4 × 500kW
- Installed capacity
- 2,000kW
- Indicative fuel saving
- $0k
- CO₂e avoided
- 0t
Telemetry platform
You shouldn't have to
drive out to know
how it's running.
Every unit in the fleet reports over 30 parameters every 15 minutes, 24/7/365, so fuel consumption, emissions and maintenance requirements are a dashboard, not a site visit.
0
Parameters per report
0min
Reporting interval
24/7
Monitored, year round
0
Platform operating hours
Fuel & emissions accounting
Equipment-level fuel burn and emissions data captured continuously, the basis for ESG reporting rather than an estimate after the fact.
Condition-based maintenance
Service is triggered by running hours and observed condition, not a calendar, which is how a gaseous fleet stays at a third to a sixth of diesel's service load.
Alarm & exception dispatch
Out-of-band conditions raise an alarm to our dispatch desk before they become an outage, and you see the same alert we do.
Where we work
Built for sites that
punish equipment.
Oil & gas
Drilling, completions, wellsite and battery power, often on the gas the site already produces.
ExploreMining
Camp, process and exploration load in places the grid was never going to reach.
ExploreData centers
Bridge power ahead of the interconnect, and grid-parallel capacity once it lands.
ExploreConstruction
Temporary site power with predictable fuel cost and no jerry cans on the lay-down.
ExploreUtilities
Load transfer, planned outage cover and capacity relief on constrained feeders.
ExploreMunicipal & water
Lift stations, treatment plants and civic facilities that cannot go dark.
ExploreRemote communities
Cleaner, quieter, cheaper prime power than the diesel plant it replaces.
ExploreEmergency response
Contingency fleet on standby for storm, wildfire and grid-loss events.
ExploreHow it runs
Load study to live power.
STEP 01
Load & fuel study
We profile the actual duty cycle and test the fuel available, pipeline, wellhead, CBM, propane or RNG.
STEP 02
Package & single line
Unit count, redundancy, switchgear, transformers and cable specified as one integrated scope.
STEP 03
Mobilize & commission
Standardized packages ship and commission fast. New-build lead times run 30-120 days.
STEP 04
Monitor & maintain
Telemetry from day one, condition-based service across Canada, parts and training if you self-perform.
Coverage
Calgary-based.
Canada-wide service.
We run routine maintenance across Canada, train contractor crews to service their own fleets, and sell parts to owner-operators. Wherever the site is, the support model doesn't change.
Service regions
- AlbertaHQ · Calgary
- British ColumbiaField service
- SaskatchewanField service
- ManitobaField service
- OntarioField service
- QuebecField service
- Atlantic CanadaField service
- TerritoriesProject basis
SUITE 1500, 150 - 9TH AVE SW, CALGARY AB
T2P 3H9
Get started
Tough load. Tougher location.
Tell us about the site.
Send the load, the duration and where it is. We'll come back with a package, an indicative fuel comparison against diesel, and a mobilization date.
- Direct line
- 403-540-8812
- Quotes & enquiries
- alex@remotepowercorp.com
- Head office
- Suite 1500, 150 - 9th Avenue SW
Calgary, Alberta T2P 3H9